This is an old revision of the document!

Printer problems are disgracefully frustrating for any user, and Macs get off easier than the other devices out there, there can various annoying issues that pop up while printing in OS X due to bad software, bad printing support, or just a low-grade printer. Printers have taken a back seat to the use of other electronic forms of communication, but sometimes your printers will not behave properly and decline to print. Sometimes you may get an error specifying a trouble with your printer setup. If you face these types of issues, then there are several approaches you can take to resolve your printer setup, including adding and removing of your printers, and changing the configuration of files on your Mac. For any type of technical issue, you can dial the toll-free Printer support helpline number and get the quality solutions from the expert technicians at very affordable rates. In case you have done a lot of printing with your printer, then you should surely know that the printer will get jammed from time to time. This happens because of the hardware issues which you can easily fix by changing the cartridge or the whole printer. The bad situation is when there is an issue within the printing system which makes it difficult to fix. If this situation happens, the best solution you can try is to reset the whole printing system. This means formatting all of the printer’s settings from your machine and restarting everything from scratch. If you are facing such printing issues on your Mac, here’s how you can reset the printing system to help you remedy the issues. Some of the times if the user is not able to reset the settings on its own, then taking the help of a reliable third party support providing company is the best option. For this, you can call on the technical support phone number for printer and get reliable technical support for the same. https://www.rebelmouse.com/printershelpsupport/use-hp-diagnostic-tools-to-fix-common-printer-problems-1777638924.html Resetting the settings in your printing system in OS X will remove all printers, scanners, and faxes from the Mac, and also clean out the complete awaiting jobs lineup for all printers. Below are the steps to reset the settings of your printer on Mac:- • First of all, go to the Printers and Scanners system preferences perhaps called Print and Scan. • Click the lock to authenticate. • Now, right-click on control-click on the list of printers along the left-hand side. • Select the Reset Print System option that shows the contextual menu. • Authenticate you wish to reset your print system. If you are not able to reset the settings then the next step would be to consult your printer’s manual to fully reset an option.